Dense White Opaque Bullseye Stringer 313

Threads of glass pulled from re-melted Bullseye Compatible sheet. For use in kilnforming or torchworking.

Stringers come in 1 or 2-mm thicknesses and are approximately 451 mm long.

We have 1mm stringers in a pack of 10 or a 1mm tube with approximately 120 pieces. The tubes are a clear plastic cylinder 457 mm long and 19 mm in diameter.

We have a 2mm stringer available in a pack of 10 only

Bullseye is 90COE and isn't compatible with Effetre or Vetrofond Rods. Annealing Temperature range is 505- 520 Celsius

Contains

Lead

May React With

Selenium, Sulfur

Cold Characteristics

Consistent colour.

Working Notes

This glass can be unstable when subjected to the extended network (pattern bars, pot melts, boiled effect, kiln casting, etc.). Firing above 1500°F (815°C) for more than 15 minutes or firing slowly between 1250°F (677°C) and 1500°F (815°C) may result in an unstable glass. More susceptible to contaminants that seed devitrification than other glasses in the Bullseye line. Cap with clear or plan to treat the surface (sandblast, coldwork, or apply clear powder and refire) after firing.

No colour shift upon firing. A dark interface reaction is possible with sulfur-bearing glasses (001137, 000137). Dense White Powder (000313-0008F) is recommended for surface use only. It may crackle when used between sheet glass layers.